2022 High quality Air Compressor Air Dryer - Aluminum Alloy Three-in-One Heat Exchanger High Efficiency and Stable Refrigeration Dryer Tr-08 – Tianer

Product Paramters

TR Series Condition

TR Series Refrigerated Air Dryer

Product Feature

1. Big rotor, low RPM, high performance.

2. Touchable LED controller, intelligent control, high-ekciency motor, production level IP54.

3. Patented airend design, ensure best compression ratio.

4. Long time continuous working hours for textile industry, programmed pre-alert, not stop immediately, to ensure enough time for machine halt.

5. No need to clean the nozzle frequently because the puri”cation process is designed at the very beginning.

6. Stable
It is equipped with a constant pressure expansion valve as standard, and is equipped with intelligent temperature control as standard. In the laboratory test, when the intake air temperature reaches 65°C and the ambient temperature reaches 42°C, it still runs stably. At the same time, it is equipped with temperature and pressure double antifreeze protection. While saving energy, it extends the service life of the equipment.

7. The model is flexible and changeable
The plate heat exchanger can be assembled in a modular fashion, that is, it can be combined into the required processing capacity in a 1+1=2 manner, which makes the design of the whole machine flexible and changeable, and can more effectively control the raw material inventory.

8. High heat exchange efficiency
The flow channel of the plate heat exchanger is small, the plate fins are waveforms, and the cross-section changes are complicated. A small plate can obtain a larger heat exchange area, and the flow direction and flow rate of the fluid are constantly changed, which increases the flow rate of the fluid. Disturbance, so it can reach turbulent flow at a very small flow rate. In the shell-and-tube heat exchanger, the two fluids flow in the tube side and the shell side respectively. Generally, the flow is cross-flow, and the logarithmic average temperature difference correction coefficient is small.

9. There is no dead angle of heat exchange, basically achieving 100% heat exchange
Due to its unique mechanism, the plate heat exchanger makes the heat exchange medium fully contact the plate surface without heat exchange dead angles, no drain holes, and no air leakage. Therefore, compressed air can achieve 100% heat exchange. Ensure the stability of the dew point of the finished product.

10. Good corrosion resistance
The plate heat exchanger is made of aluminum alloy or stainless steel structure, which has good corrosion resistance and can also avoid secondary pollution of compressed air. Therefore, it can be adapted to various special occasions, including marine ships, with corrosive gases The chemical industry, as well as the more stringent food and pharmaceutical industries.

Product Display