Welcome to Yancheng Tianer

High Quality Air Dryer - Air Cooling Compressed Refrigerated Air Dryer Per Compressed Air After Cooler with ISO 9001certificate Tr-03 – Tianer

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our progress depends about the advanced products ,fantastic talents and continuously strengthened technology forces for Screw Type Air Compressor, Multi Stage Compressor, Compressor Fan, We sincerely hope to serve you and your business with a good start. If there is anything we can do for You, we shall be more than pleased to do so. Welcome to our factory for visit.
High Quality Air Dryer - Air Cooling Compressed Refrigerated Air Dryer Per Compressed Air After Cooler with ISO 9001certificate Tr-03 – Tianer Detail:

Product Paramters

TR series refrigerated air dryer TR-03
Max air volume 150CFM
Power supply 220V / 50HZ (Other power can be customized)
Input power 0.98HP
Air pipe connection RC1”
Evaporator type Aluminum alloy plate
Refrigerant  model R410a
System max pressure drop 3.625 PSI
Display interface LED dew point display, LED alarm code display,operation status indication
Intelligent anti-freezing protection Constant pressure expansion valve and compressor automatic start/stop
Temperature control Automatic control of condensing temperature/dew point temperature
High voltage protection Temperature sensor
Low voltage protection Temperature sensor and inductive intelligent protection
Weight(kg) 50
Dimensions L × W × H(mm) 22.83” × 18.11” × 30.9”
Installation environment: No sun, no rain, good ventilation, device level hard ground, no dust and fluff

TR Series Condition

1. Ambient temperature:  38℃, Max. 42℃
2. Inlet temperature: 38℃, Max. 65℃
3. Working pressure: 0.7MPa, Max.1.6Mpa
4. Pressure dew point: 2℃~10℃(Air dew point:-23℃~-17℃)
5. No sun, no rain, good ventilation, device level hard ground, no dust and fluff

TR Series Refrigerated Air Dryer

TR series refrigerated
Air dryer
Model TR-01 TR-02 TR-03 TR-06 TR-08 TR-10 TR-12
Max. air volume m3/min 1.4 2.4 3.8 6.5 8.5 11 13.5
Power supply 220V/50Hz
Input power KW 0.37 0.52 0.73 1.26 1.87 2.43 2.63
Air pipe connection RC3/4″ RC1″ RC1-1/2″ RC2″
Evaporator type Aluminum alloy plate
Refrigerant model R134a R410a
System Max.
pressure drop
0.025
Intelligent control and protection
Display interface LED dew point display, LED alarm code display,operation status indication
Intelligent anti-freezing protection Constant pressure expansion valve and compressor automatic start/stop
Temperature control Automatic control of condensing temperature/dew point temperature
High voltage protection Temperature sensor
Low voltage protection Temperature sensor and inductive intelligent protection
Energy saving KG 34 42 50 63 73 85 94
Dimension L 480 520 640 700 770 770 800
W 380 410 520 540 590 590 610
H 665 725 850 950 990 990 1030

The refrigeration system of the cold and dry machine belongs to compression refrigeration, which is composed of four basic components: refrigeration compressor, condenser, evaporator and expansion valve. They are connected in turn by pipes to form a closed system in which the refrigerant is constantly circulating, changing state and exchanging heat with compressed air and cooling media.

In the refrigeration system of cold drying machine, the evaporator is the equipment for conveying cold quantity, in which the refrigerant absorbs the heat of compressed air to achieve the purpose of dehydration and drying. Compressor is the heart, plays the role of suction, compression, transport refrigerant steam. Condenser is a device that emits heat, transferring the heat absorbed in the evaporator together with the heat converted from the input power of the compressor to the cooling medium (such as water or air) away.

The expansion valve/throttle valve throttles and depresses the refrigerant, controls and regulates the amount of refrigerant liquid flowing into the evaporator, and divides the system into two parts: high pressure side and low pressure side. In addition to the above components, the cold and dry machine also includes energy regulating valve, high and low pressure protector, automatic blowdown valve, control system and other components.

Intelligent
Multi-channel temperature and pressure monitoring, real-time display of dew point temperature, automatic recording of accumulated running time, self-diagnosis function, display of corresponding alarm codes, and automatic protection of equipment

The model is flexible and changeable
The plate heat exchanger can be assembled in a modular fashion, that is, it can be combined into the required processing capacity in a 1+1=2 manner, which makes the design of the whole machine flexible and changeable, and can more effectively control the raw material inventory.

High heat exchange efficiency
The flow channel of the plate heat exchanger is small, the plate fins are waveforms, and the cross-section changes are complicated. A small plate can obtain a larger heat exchange area, and the flow direction and flow rate of the fluid are constantly changed, which increases the flow rate of the fluid. Disturbance, so it can reach turbulent flow at a very small flow rate. In the shell-and-tube heat exchanger, the two fluids flow in the tube side and the shell side respectively. Generally, the flow is cross-flow, and the logarithmic average temperature difference correction coefficient is small.

There is no dead angle of heat exchange, basically achieving 100% heat exchange
Due to its unique mechanism, the plate heat exchanger makes the heat exchange medium fully contact the plate surface without heat exchange dead angles, no drain holes, and no air leakage. Therefore, compressed air can achieve 100% heat exchange. Ensure the stability of the dew point of the finished product.

Good corrosion resistance
The plate heat exchanger is made of aluminum alloy or stainless steel structure, which has good corrosion resistance and can also avoid secondary pollution of compressed air. Therefore, it can be adapted to various special occasions, including marine ships, with corrosive gases The chemical industry, as well as the more stringent food and pharmaceutical industries.

FAQ

1. Are you a factory or a trading company?
A: We are factory, and We have the right to export any country independently

2.What is the specific address of your company?
A: No.23, Fukang Road, Dazhong Industrial Park, Yancheng, Jiangsu, China

3. Do your company accept ODM & OEM?
A: Yes, of course. We accept full ODM & OEM.

4. What about the voltage of products? Can they be customized?
A: Yes, of course. The voltage can be customized according to your requirement.

5. Do your company offer spare parts of the machines?
A: Yes, of course, high quality spare parts are available in our factory.

6. What are your payment terms?
A: 30% T/T in advance, 70% T/T before delivery.

7. What payment ways do you accept?
A: T/T, Western Union

8. How long will you take to arrange the goods?
A: For normal voltages,we can delivery the goods within 7-15 days. For other electricity or other customized machines, we will delivery within 25-30 days.

For more information or details, pls directly contact.

Product Display

Air Dryer TR-03 (1)
Air Dryer TR-03 (4)
Air Dryer TR-03 (3)
Air Dryer TR-03 (2)


Product detail pictures:

High Quality Air Dryer - Air Cooling Compressed Refrigerated Air Dryer Per Compressed Air After Cooler with ISO 9001certificate Tr-03 – Tianer detail pictures

High Quality Air Dryer - Air Cooling Compressed Refrigerated Air Dryer Per Compressed Air After Cooler with ISO 9001certificate Tr-03 – Tianer detail pictures

High Quality Air Dryer - Air Cooling Compressed Refrigerated Air Dryer Per Compressed Air After Cooler with ISO 9001certificate Tr-03 – Tianer detail pictures

High Quality Air Dryer - Air Cooling Compressed Refrigerated Air Dryer Per Compressed Air After Cooler with ISO 9001certificate Tr-03 – Tianer detail pictures


Related Product Guide:

We keep on with our business spirit of "Quality, Performance, Innovation and Integrity". We goal to create much more worth for our customers with our rich resources, state-of-the-art machinery, experienced workers and exceptional providers for High Quality Air Dryer - Air Cooling Compressed Refrigerated Air Dryer Per Compressed Air After Cooler with ISO 9001certificate Tr-03 – Tianer , The product will supply to all over the world, such as: Senegal, Jordan, Kenya, When It produced, it making use of the world's major method for reliable operation, a low failure price, it appropriate for Jeddah shoppers choice. Our enterprise. s situated inside the national civilized cities, the website traffic is very hassle-free, unique geographical and financial circumstances. We pursue a "people-oriented, meticulous manufacturing, brainstorm, make brilliant" company philosophy. Strict good quality management, fantastic service, affordable cost in Jeddah is our stand around the premise of competitors. If needed, welcome to make contact with us by our web page or phone consultation, we'll be delighted to serve you.
  • Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
    5 Stars By Audrey from Gabon - 2018.06.12 16:22
    Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
    5 Stars By Pearl from Seychelles - 2018.09.12 17:18
    whatsapp