OEM/ODM Factory Refrigerated Air Dryer Working Animation - TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor – Tianer
OEM/ODM Factory Refrigerated Air Dryer Working Animation - TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor – Tianer Detail:
Product Parameter
| TR series refrigerated air dryer | TR-40 | ||||
| Max air volume | 1500CFM | ||||
| Power supply | 380V / 50HZ (Other power can be customized) | ||||
| Input power | 10.7HP | ||||
| Air pipe connection | DN100 | ||||
| Evaporator type | Aluminum alloy plate | ||||
| Refrigerant model | R407C | ||||
| System max pressure drop | 3.625 PSI | ||||
| Display interface | LED dew point display, LED alarm code display,operation status indication | ||||
| Intelligent anti-freezing protection | Constant pressure expansion valve and compressor automatic start/stop | ||||
| Temperature control | Automatic control of condensing temperature/dew point temperature | ||||
| High voltage protection | Temperature sensor | ||||
| Low voltage protection | Temperature sensor and inductive intelligent protection | ||||
| Weight(kg) | 550 | ||||
| Dimensions L × W × H（mm) | 1575*1100*1640 | ||||
| Installation environment: | No sun, no rain, good ventilation, device level hard ground, no dust and fluff | ||||
TR Series Condition
| 1. Ambient temperature: 38℃, Max. 42℃ | |||||
| 2. Inlet temperature: 38℃, Max. 65℃ | |||||
| 3. Working pressure: 0.7MPa, Max.1.6Mpa | |||||
| 4. Pressure dew point: 2℃~10℃（Air dew point：-23℃~-17℃） | |||||
| 5. No sun, no rain, good ventilation, device level hard ground, no dust and fluff |
TR Series Refrigerated Air Dryer
| TR series refrigerated Air dryer |
Model | TR-15 | TR-20 | TR-25 | TR-30 | TR-40 | TR-50 | TR-60 | TR-80 | |
| Max. air volume | m3/min | 17 | 23 | 28 | 33 | 42 | 55 | 65 | 85 | |
| Power supply | 380V/50Hz | |||||||||
| Input power | KW | 3.7 | 4.9 | 5.8 | 6.1 | 8 | 9.2 | 10.1 | 12 | |
| Air pipe connection | RC2″ | RC2-1/2″ | DN80 | DN100 | DN125 | |||||
| Evaporator type | Aluminum alloy plate | |||||||||
| Refrigerant model | R407C | |||||||||
| System Max. pressure drop |
0.025 | |||||||||
| Intelligent control and protection | ||||||||||
| Display interface | LED dew point display, LED alarm code display,operation status indication | |||||||||
| Intelligent anti-freezing protection | Constant pressure expansion valve and compressor automatic start/stop | |||||||||
| Temperature control | Automatic control of condensing temperature/dew point temperature | |||||||||
| High voltage protection | Temperature sensor | |||||||||
| Low voltage protection | Temperature sensor and inductive intelligent protection | |||||||||
| Energy saving: | KG | 180 | 210 | 350 | 420 | 550 | 680 | 780 | 920 | |
| Dimension | L | 1000 | 1100 | 1215 | 1425 | 1575 | 1600 | 1650 | 1850 | |
| W | 850 | 900 | 950 | 1000 | 1100 | 1200 | 1200 | 1350 | ||
| H | 1100 | 1160 | 1230 | 1480 | 1640 | 1700 | 1700 | 1850 | ||
Product Featuer
Compact structure and small size
The plate heat exchanger has a square structure and occupies a small space. It can be flexibly combined with refrigeration components in the equipment without excessive space waste.
The model is flexible and changeable
The plate heat exchanger can be assembled in a modular fashion, that is, it can be combined into the required processing capacity in a 1+1=2 manner, which makes the design of the whole machine flexible and changeable, and can more effectively control the raw material inventory.
High heat exchange efficiency
The flow channel of the plate heat exchanger is small, the plate fins are waveforms, and the cross-section changes are complicated. A small plate can obtain a larger heat exchange area, and the flow direction and flow rate of the fluid are constantly changed, which increases the flow rate of the fluid. Disturbance, so it can reach turbulent flow at a very small flow rate. In the shell-and-tube heat exchanger, the two fluids flow in the tube side and the shell side respectively. Generally, the flow is cross-flow, and the logarithmic average temperature difference correction coefficient is small. ,
There is no dead angle of heat exchange, basically achieving 100% heat exchange
Due to its unique mechanism, the plate heat exchanger makes the heat exchange medium fully contact the plate surface without heat exchange dead angles, no drain holes, and no air leakage. Therefore, compressed air can achieve 100% heat exchange. Ensure the stability of the dew point of the finished product.
Good corrosion resistance
The plate heat exchanger is made of aluminum alloy or stainless steel structure, which has good corrosion resistance and can also avoid secondary pollution of compressed air. Therefore, it can be adapted to various special occasions, including marine ships, with corrosive gases The chemical industry, as well as the more stringent food and pharmaceutical industries.
Product Display
Product detail pictures:
Related Product Guide:
We have been ready to share our knowledge of internet marketing worldwide and recommend you suitable merchandise at most aggressive rates. So Profi Tools present you very best price of money and we are ready to develop alongside one another with OEM/ODM Factory Refrigerated Air Dryer Working Animation - TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor – Tianer , The product will supply to all over the world, such as: Bhutan, Orlando, Bangalore, Furthermore, all of our items are manufactured with advanced equipment and strict QC procedures in order to ensure high quality. If you are interested in any of our goods, please don't hesitate to contact us. We will do our best to meet your needs.
By Astrid from Portugal - 2017.04.28 15:45
We have worked with many companies, but this time is the best，detailed explanation, timely delivery and quality qualified, nice!
By Christina from Serbia - 2017.06.29 18:55
